Release Notes


M400 Version 1.1.4 available
| Feb 20, 2020 | Vuzix M400 Team

Feb 20, 2020  |     Adds speech commands to take a picture and record a video. Simplifies the speech recognition settings. Supports Vuzix speech recognition SDK v1.6. Minor bug fixes and enhancements.

M400 Version 1.1.3 available
| Feb 03, 2020 | Vuzix M400 Team

Feb 03, 2020  |     Adds Mexico regulatory marking. Improves the quality of speech recognition in noisy environments. Corrects a scenario where the M400 would not properly power-down when unplugged.

M300 OS Version 1.7.2 - Release Notes
| Jan 29, 2020 | Vuzix M300 Team

Jan 29, 2020  |     M300 OS Version 1.7.2 - Release Notes Modified the Wi-Fi roaming logic to make better decisions and introduce additional retries to prevent connectivity losses. Added a new configuration parameter DHCP Renew on Roam under Setting > Wi-Fi > Advanced. The older M300XL and M300 versions always performed a DHCP Renew when roaming. Enabling this option will match the previous behavior. However, certain networks do not respond to DHCP renew messages in a timely manner and enabling this will cause connectivity interruptions. It is recommended to leave this option at the default disabled state unless your network administrator requires otherwise. Applied Android security patches to bring the device up to compliance as of the December 2019 bulletin.For more information on these security bulletins, refer to the official Android Security Bulletin page here.

Vuzix Remote Assist Version 2.4 - Release Notes
| Jan 24, 2020 | Vuzix Remote Assist Team

Jan 24, 2020  |     What's New for VRA Glasses: VRA now supports the Blade! M300 and Blade devices will now default to VGA mode for video calls. Small UI tweaks to the in-call menu to improve the overall experience on Blade devices. Bug fix for workflows in which long instruction text was not being displayed properly. Bug fix for Japanese characters not properly displaying in workflows. What’s New for VRA Portal: Configuration change to allow M300 and Blade to default to VGA mode for video calls. Bug fix for images in the Shared Files location not syncing properly across Mobile + Glasses. Bug fix for when the call quality was showing up as undefined when switching between VGA and HD modes. What's New for VRA Mobile: Added a pop-up message for users when an outgoing call gets rejected. Bug fix for phones running Android 9+10 where rotating the phone during a video call would sometimes disconnect you. Bug fix for Samsung phones where the "Activate automatic user selection on call" setting was not working. Bug fix for Japanese characters not properly displaying in workflows.

Vuzix Remote Assist Version 2.3.3 - Release Notes
| Jan 06, 2020 | Vuzix Remote Assist Team

Jan 06, 2020  |     Glasses What's New New features, bug fixes and performance improvements for a better experience: Unified user type. This allows users to log in with their credentials on any of the supported platforms (dashboard, mobile, glasses). Improved reconnection rate for dropped calls caused by Wi-Fi roaming or disconnecting Concurrent login fixes. Users will now be notified if another person logs in to a device using their credentials. Various UI bug fixes Mobile What's New Video calling. VRA Mobile now supports video calling, permitting users to log in using VRA credentials and perform calls right from their mobile device. Workflows. Workflows enable users to follow quick step-by-step instructions in order to complete simple tasks. Anonymous caller. This feature allows users to join a 24-hour temporary call room in which someone without VRA can connect without needing an account. Gallery support. Capture, save, and view pictures taken during call sessions within the mobile app. Glasses QR Login. Generate a login QR code from within the app that can be scanned by a smart glasses device in order to log in.

M400 Version 1.1.2 available
| Jan 03, 2020 | Vuzix M400 Team

Jan 03, 2020  |     Adds a system setting to disable the touchpad sensor. Adds a system setting to use Bluetooth microphone for speech recognition. Allows the device to wake from sleep using any button. Updates chromium WebView to 79.0.3945.79. Updates speech recognition wake words for French, German, and Spanish. Now supports “Bonjour Vuzix”, “Hallo Vuzix”, and “Hola Vuzix”. English, Japanese, and Mandarin Chinese remain unchanged “Hello Vuzix”, ハロー、ビュージックス, and 你好小辐. Allows APK applications to be installed by scanning QR codes of URL. Reduces the flash illumination LED brightness. Corrects touchpad up/down gestures when worn on the left eye. Updates Android security patches to compliance with the October 2019 bulletin

M300 OS Version 1.7.0 - Release Notes
| Dec 26, 2019 | Vuzix M300 Team

Dec 26, 2019  |     M300 OS Version 1.7.0 - Release Notes Enabled support for the Vuzix Smart Glasses Companion App which runs on most Android and iOS smart phones. Solved an issue that could prevent the device from shutting down automatically once power is removed, occasionally resulting in a completely dead battery after storage. Allows the WebView to be manually updated to allow compatibility to applications requiring this. Supports Vuzix Barcode SDK version 1.5. Supports Vuzix Speech SDK version 1.5. Updated the MicroG libraries to revision 0.2.9.19420. These allow compatibility to Google location service and firebase messaging. Updated the End-User Software License Agreement stored on-device. The updated text of the agreement can be found on https://www.vuzix.com/support/EULA Applied Android security patches to bring the device up to compliance as of the November 2019 bulletin.

Vuzix Blade® OS Version 2.9 - Release Notes
| Dec 09, 2019 | Vuzix Blade® Team

Dec 09, 2019  |     Home App/Notifications App Resolved issues with notification actions while connected to Android 10 based devices Control App Improved formatting and performance for media control System/Developer Improvements Improved settings intent handlers HudActionMenu is now theme-able Various bug fixes

Vuzix Blade® OS Version 2.8 - Release Notes
| Nov 18, 2019 | Vuzix Blade® Team

Nov 18, 2019  |     Home App/Notifications App Resolved issues with notifications not syncing after reboot on iOS Companion Link Resolved connectivity issues with iOS 13 devices Control App Improved stability and performance for media control Fixed an issue where Control would report "Unknown" if no music was playing Settings App Added the ability to configure Static IP addresses under advance WiFi settings Modified Bluetooth profile naming scheme Improved Bluetooth volume management Added a new regulatory image for China and South Africa certification for the Blade System Modified available symbols while using the on-screen soft-keyboard for number and symbol entry Added OTA status popups Applied security patches to bring the Blade OS up to compliance as of the October 2019 bulletin.  For more information on these security bulletins, refer to the official Android Security Bulletin page here. Various bug fixes

M400 Version 1.1.1 available
| Nov 01, 2019 | Vuzix M400 Team

Nov 01, 2019  |     Adds support for the Vuzix companion app which runs on most iOS and Android phones and tablets. Adds the MicroG replacement for Google Play Services. This allows location and cloud messaging to the M400. Provides full compatibility to the Vuzix Barcode SDK version 1.4 and higher. Adds the Android Management API to enroll and provision a new device. Corrects minor user interface issues. Fixes a problem that caused the camera preview to freeze or update very slowly.

M400 Version 1.0.2 available
| Oct 01, 2019 | Vuzix M400 Team

Oct 01, 2019  |     Adds Japan regulatory mark. Upgrades Webview to 77.0.3865.92.

M400 Version 1.0.1 available
| Sep 20, 2019 | Vuzix M400 Team

Sep 20, 2019  |     Corrects an issue that caused the gravity sensor to stop reporting data. Corrects minor user interface issues. Improves camera performance.

Vuzix Blade® OS Version 2.7 - Release Notes
| Oct 02, 2019 | Vuzix Blade® Team

Oct 02, 2019  |     Home App/Notifications App Redesigned notifications look and feel Fixed notification specific bugs Settings App Added Auto-connect function for Wi-Fi Camera App Improved shutdown procedure to gracefully handle saving video prior to shutdown System Added OTA status popups Applied security patches to bring the Blade OS up to compliance as of the September 2019 bulletin.  For more information on these security bulletins, refer to the official Android Security Bulletin page here. Various bug fixes

M400 Version 1.0.0 available
| Sep 17, 2019 | Vuzix M400 Team

Sep 17, 2019  |     M400 Version 1.0 is now available.

Vuzix Blade® OS Version 2.6 - Release Notes
| Aug 20, 2019 | Vuzix Blade® Team

Aug 20, 2019  |     System Updated Webview to version 76. YouTube video playback now supported in browsers available on the Vuzix App Store. Audio and Speech Recognition Updated Speech SDK to allow developers to add their own Speech Recognition trigger words. Settings App Added an option to the display timeout settings to never sleep the display.

Vuzix Blade® OS Version 2.5 - Release Notes
| Aug 08, 2019 | Vuzix Blade® Team

Aug 08, 2019  |     Audio and Speech Recognition Added support for multiple wake words: "Hello Vuzix" and "Hello Blade”. Speech Recognition engine now capable of being configured to respond to commands in Japanese. Speech commands enabled to quickly retrieve installed virtual assistants. “Hey Alexa" opens Amazon Alexa if available. "Hey Google" gets Google Assistant if available. “Get Assistant" can be configured to the preferred installed assistant. Documentation and sample applications on how to leverage the Vuzix Speech Recognition SDK now available on the Blade Developer Blade Developer Center. Camera App Blade will automatically start new recording and save old recording when the 4GB file size limit is reached. System Improved aspect ratio for applications leveraging full screen video playback. Blade now supports LocationManager.GPS_PROVIDER. Resolved minor issues with location services settings. Security Applied security patches to bring the Blade OS up to compliance as of the July 2019 bulletin.  For more information on these security bulletins, refer to the official Android Security Bulletin page here. Updated EULA/terms of use.

M300 OS Version 1.6.3 - Release Notes
| Jul 01, 2019 | Vuzix M300 Team

Jul 01, 2019  |     M300 OS Version 1.6.3 - Release Notes Enabled users to disable the soft keyboard. Corrected a problem where the camera's optical image stabilization (OIS) motor may continue to operate after having been configured in Settings to be disabled. Applied security patches to bring the M300 OS up to compliance as of the June 2019 bulletin.  For more information on these security bulletins, refer to the official Android Security Bulletin page here.

M300 OS Version 1.6.2 - Release Notes
| Jun 04, 2019 | Vuzix M300 Team

Jun 04, 2019  |     M300 OS Version 1.6.2 - Release Notes Applied security patches to bring the M300 OS up to compliance as of April 2019. For more information on these security bulletins, refer to the official Android Security Bulletin page here. Fixed other minor bugs.

M300 OS Version 1.6.1 - Release Notes
| Mar 26, 2019 | Vuzix M300 Team

Mar 26, 2019  |     M300 OS Version 1.6.1 - Release Notes Implemented significant changes to the Wi-Fi roaming algorithm to reduce the time to complete Wi-Fi roaming handovers in most network environments Corrected a bug which prevented automatically re-connecting to access points that have been power cycled Updated MicroG service to version 0.2.6.13280 Applied security patches to bring the M300 OS up to compliance as of the February 2019 bulletin For more details, reference the official Android Security Bulletins page here

Vuzix Blade® OS Version 2.4 - Release Notes
| Jun 11, 2019 | Vuzix Blade® Team

Jun 11, 2019  |     Virtual Inputs Added ability to navigate the Blade interface with a mouse input controlled via the Companion App virtual trackpad Companion App version 1.3.0 or higher required​ System Added two instructional screens to the Blade first time user experience tutorial Various bug fixes